Technical Information

SPECIAL WATER FITTINGS

SPECIFICATION
These fittings are suitable for deionised, distilled, de-mineralised and R/O types of pure water. They can be used with other media that should not be in contact with non-ferrous metals (ask for details).

Materials
The materials that are in contact with the media are POM, PEX and EPDM. On recirculation fittings the material is ABS. (We can supply these fittings in PP or Stainless Steel if requiried), and like all other fittings they have the Polyester finish to protect from chemicals.

Mounting
Is similar to the water and technical gas fitting see page with mounting instructions.

The recirculation valve requirements should be discussed with the special water supplier.

Testing
All fittings are tested and inspected before dispatch.

Maximum working pressure is 1000 kPa (10 Bar).

Maximum test pressure is 1000 kPa (10 Bar).

Laboratory furniture companies should always liaise with the installer of the pure water systems to ensure the fittings are compatible with the rest of the system.

When the system is completed it should be flushed for up to 3 hours to remove any swarf and glue from the installation.

Also in this section:

- WATER FITTINGS
- DROP LEVER GAS COCKS
- BURNING GAS "LIFT / TURN" FITTINGS
- TECHNICAL GAS, BURNING GAS & VACUUM VALVES